Skip to main content

Hybrid Card Using OWH Sketch #14

  This card was made by following sketch #14 from the Operation Write Home PDF. I used My Memories Suite to design the card. I used Pastel Unicorn digital papers and clipart by JennL_designs, from Creative Fabrica. The finished card:

The screenshot of my card pieces before printing:

I use card blanks with envelopes from Dollar General. I used white cardstock to mat some pieces. This is the sketch:
Entering this card in the following challenges:

Comments

  1. This is cute! I have Memories Suite but I have never used it! I must give it a try your card is lovely!
    Thanks for accepting our play date at 613 Avenue Create !
    Hugz,
    Chana Malkah, Owner
    Redora Lee Designs , My Blog
    A Place to Start , Challenge Blog
    613 Avenue Create , Challenge Blog

    ReplyDelete
  2. Very cute card, lovely sweet design. Thank you for joining us at 613 Avenue Create this month. Hope to see you back here again soon. Judy DT https://avenue613.blogspot.com/

    ReplyDelete

Post a Comment

Popular posts from this blog

Hybrid Card Using OWH Sketch #13

  This card was made by following sketch #13 from the  Operation Write Home  PDF. I used  My Memories Suite  to design the card. I used a Lettering Delights Hedgehogs graphics, alphabet, and paper set. The finished card: The screenshot of my card pieces (I included an insert for my card) before printing: I also used some white cardstock for matting, and here is  OWH sketch #13: Entering this card in the folllowing challenges: 613 Avenue Create

Hybrid Card Using OWH Sketch #10

   I used card making sketch #10 from  Operation Write Home . I used  My Memories Suite  to design my card sheet, and  HP Instant Ink  to print my card sheet. This is the sketch: I used my snipping tool app to bring the sketch (resized it to 4 x 5 1/4) into My Memories Suite. I used Labrador Dogs Digital Papers & Clipart by JennyL_designs from Creative Fabrica.  I included an insert for inside of card too. I use photo shapes to fill in most of the card pieces. The dog embellishments I cut out leaving a slim white border. I used 3D tape for dimesion on the dogs and sentiment. My screenshot before printing: Here is my finished 4 1/4X5 1/2in. card:

Hybrid Card Using OWH Sketch #8

    I used  OWH sketch  #8. I  used  My Memories Suite  to design, and  HP Instant Ink  to print my card sheet.  So, this is the sketch: I used Animal Buddies graphic set and Spring Buddies paper pack from  Lettering Delights . I screen snipped the sketch from the PDF so I could bring it into MMS (My Memories Suite) I sized the sketch to 4" X 5.25". I then used photo box shapes to fill most parts of the sketch from the graphic & paper sets.  I include a small picture of the sketch, and if I have room I fill a shape to cover my envelope flap too. After printing and cutting pieces out, I layer them on top of a 4.25 X 5.50 in. white card base. Here's my screenshot in MMS before printing my card sheet: Here's my finished card. I added extra elephant and ear layers.